Tips For Troubleshooting Your Home Alarm System In Saginaw
False alarms and system malfunctions can be frustrating, and even worse, could prevent your home’s security from working the way it should. Fortunately, most troubles, from dead batteries to false alarms, are straightforward to remedy. Explore our suggestions for troubleshooting your home alarm system in Saginaw. We’ll help you keep your household shielded and your system operating smoothly.
Test Your Home Security System In Saginaw
One sensible way to troubleshoot your home’s security is to test it! Newer systems let you place them in test mode to keep you from initiating an emergency call. Once in test mode, follow these steps:
- Turn on your system as you normally would when going out.
- Open a window or door protected by a contact sensor, or try to set off another sensor. Shut the door or window once you’re finished so it doesn’t prompt the alarm as you reactivate the system.
- Permit the alarm to resonate for 60 seconds to make sure a message is dispatched to the security provider and an entry is created in the alarm system log.
- Proceed to test devices as you wish
- Inspect the system activity log to verify functionality.
No need to worry, monitoring specialists will be able to see that your system is undergoing a test. Just be sure to switch out of test mode when complete. It’s smart to test once a month or whenever you make changes to your home’s internet or phone provider.
Evaluate The Position And State Of Motion Detectors
Although an crucial part of your alarm system, motion sensors are well known for false alarms. You can help prevent them with some simple troubleshooting.
- Do a visual check. Is there anything that could shift within the sensor’s detection range, like a curtain taken by a breeze?
- Is the sensor clean? Dirt, cobwebs, and debris can cause issues. Make sure the face is clean.
- Does the motion detector offer pet immunity you can activate? Some can be configured to ignore pets weighing as much as 100 pounds.
- When was the battery replaced? Low batteries may impact performance or cause false alarms.
- Is a heat source impairing the sensor? Excessive heat from sunlight or a fireplace can set off an alarm.
Keep Batteries On Hand And Look Out For Low Battery Notifications
One helpful perk of modern home security systems is that they’ll let you know when batteries are running low. If your system is equipped with a control panel or app, you’ll often discover messages there. Depending on your alarm, you might detect an intermittent beep when batteries are getting low.
Contact sensors, smoke detectors, motion sensors, and other wireless components have batteries that will have to be replaced every so often. It’s wise to keep batteries on hand and set a replacement schedule. Top systems also have a rechargeable backup battery for the central control panel. This backup helps keep your system functioning if you lose power and should charge back up once the electricity is working again. If it doesn’t recharge, you will need to replace it.
Troubleshooting Is Easy With ADT Home Security In Saginaw
As the foremost name in home security, ADT builds systems that offer superior functionality and convenience. Getting into test mode is simple through the ADT+ app or MyADT.com, and you’ll always be sent updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Saginaw home. Dial (989) 214-1746 or submit our form today!